Manufacturer of ANSI B16.5 Screwed Flange and Screwed Pipe Flanges in ASME B16.5 Class 150 Lb, 300 Lb, 400 Lb, 600 Lb, 900 Lb, 1500 Lb and 2500 Lb as per ASME/ ASA/ ANSI B16.5
Rajendra Industrial Corporation produces, distributes, and stores goods. Screwed Flanges are pipe flanges that are used in a range of industrial applications. They're a type of pipe flange that doesn't need to be soldered to the pipe. Inner threads on screwed flanges complement the pipe's outer thread. Regardless of the reality that the Screwed flange arrangement is available in a multitude of sizes and pressure ratings, it is most often used in piping systems with dimensions of less than 4 inches. Its typical uses include non-toxic, low-pressure, and low-temperature applications. Screwed flanges with a diameter of 1/2 to 2 inches are significantly more common than those with a diameter greater than 2 inches. Due to the lower pressure used, screwed flanges only have flat and raised faces. They can't be used in high-temperature applications because the thread form may bend, causing spillage.
Table Of Contents
SS Screwed Flanges offer the privilege of being capable to connect to a pipe without needing to be soldered. Forming connections with no need to weld is a major feature that is vital in some regions and industries, such as toxic zones like gas stations, hexane plants, and businesses with combustible fluids, to name a few. If no welding is required, a potential source of flame is eliminated. Screwed flange joints are also faster and easier to put together and remove than welded flange connections. ASME B16.5 Screwed Flanges are not advised for thin-walled pipelines since threading removal is difficult. In some cases, a seal weld may be used to enhance the flange's longevity and decrease the potential of leakage. The inclusion of a seal welding reinforces the flange, but it also complicates the installation and dismantling of the connection (because the weld makes it a permanent joint).
| Size | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
|---|---|
| Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| Pressure Rating ANSI | Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 |
| Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production Technique | Forged, Heat treated and machined |
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF) |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Material | Brass Screwed Flange, Titanium Screwed Flange, Incoloy Screwed Flange, Nickel Alloy Screwed Flange, Super Duplex Screwed Flange, Monel Screwed Flange, Duplex Steel Screwed Flange, Copper Nickel Screwed Flange, Inconel Screwed Flange, Stainless Steel Screwed Flange, SMO 254 Screwed Flange, Hastelloy Screwed Flange, AISI 4130 Screwed Flange, Alloy 20 Screwed Flange. |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Manufacturer of ANSI B16.5 Screwed Flange and Screwed Pipe Flanges in ASME B16.5 Class 150 Lb, 300 Lb, 400 Lb, 600 Lb, 900 Lb, 1500 Lb and 2500 Lb as per ASME/ ASA/ ANSI B16.5
| Price list of ASME B16.47 Series A Screwed Flange | US $0.5-1000 / Piece (FOB Price) |
| ANSI B16.5 Class 150 Screwed Flanges Price in India | US $300-500 / Ton (FOB Price) |
| Price list of Screwed Forged Flanges | US $1-900 / Piece (FOB Price) |
| Stainless Steel Screwed Flanges Price | US $0.5-1000 / Piece (FOB Price) |
| Screwed Flange Price List | US $1-300 / Piece (FOB Price) |
| Screwed Flange Price Per Piece in India | US $1-800 / Piece (FOB Price) |
| ASME B16.5 Class 300 Raised Faced Screwed Flanges Price | US $15-900 / Piece (FOB Price) |
| Price of Flat Faced Screwed Flanges EN 1092-1 Type 02 | US $20-1500 / Piece (FOB Price) |
| EN 1092-2 PN16 Screwed Flange Price List | US $26-2000 / Piece (FOB Price) |
| AWWA C207 Class d Screwed Flange Price | US $18-1800 / Piece (FOB Price) |
We can supply BS 4504 PN10 Screwed Flanges with customized Class / Pressure and sizes, view EN 1092-1 Type 02 Class 150 Screwed Flange Price.
| FLANGE NPS |
Inside Diameter |
Outside Diameter |
Bolt Circle (BC) | Raised Face (R) | Raised Face (RF) | H | Raised Face Thickness (T) | T1 | Flat Face Thickness (T2) | Bolt Hole (B) | No. of Bolt Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2″ | 0.93″ | 3.50″ | 2.38″ | 1.38″ | .063″ | 1.19″ | .62″ | .38″ | .56″ | .62″ | 4 |
| 3/4″ | 1.14″ | 3.88″ | 2.75″ | 1.69″ | .063″ | 1.50″ | .62″ | .44″ | .56″ | .62″ | 4 |
| 1″ | 1.41″ | 4.25″ | 3.12″ | 2.00″ | .063″ | 1.94″ | .69″ | .50″ | .63″ | .62″ | 4 |
| 1-1/4″ | 1.75″ | 4.62″ | 3.50″ | 2.50″ | .063″ | 2.31″ | .81″ | .56″ | .75″ | .62″ | 4 |
| 1-1/2″ | 1.99″ | 5.00″ | 3.88″ | 2.88″ | .063″ | 2.56″ | .88″ | .62″ | .82″ | .62″ | 4 |
| 2″ | 2.50″ | 6.00″ | 4.75″ | 3.62″ | .063″ | 3.06″ | 1.00″ | .69″ | .94″ | .75″ | 4 |
| 2-1/2″ | 3.00″ | 7.00″ | 5.50″ | 4.12″ | .063″ | 3.56″ | 1.12″ | .82″ | 1.06″ | .75″ | 4 |
| 3″ | 3.63″ | 7.50″ | 6.00″ | 5.00″ | .063″ | 4.25″ | 1.19″ | .88″ | 1.13″ | .75″ | 4 |
| 3-1/2″ | 4.13″ | 8.50″ | 7.00″ | 5.50″ | .063″ | 4.81″ | 1.25″ | .88″ | 1.19″ | .75″ | 8 |
| 4″ | 4.63″ | 9.00″ | 7.50″ | 6.19″ | .063″ | 5.31″ | 1.31″ | .88″ | 1.25″ | .75″ | 8 |
| 5″ | 5.69″ | 10.00″ | 8.50″ | 7.31″ | .063″ | 6.44″ | 1.44″ | .88″ | 1.38″ | .88″ | 8 |
| 6″ | 6.75″ | 11.00″ | 9.50″ | 8.50″ | .063″ | 7.56″ | 1.56″ | .94″ | 1.50″ | .88″ | 8 |
| 8″ | 8.75″ | 13.50″ | 11.75″ | 10.62″ | .063″ | 9.69″ | 1.75″ | 1.06″ | 1.69″ | .88″ | 8 |
| 10″ | 10.88″ | 16.00″ | 14.25″ | 12.75″ | .063″ | 12.00″ | 1.94″ | 1.13″ | 1.88″ | 1.00″ | 12 |
| 12″ | 12.94″ | 19.00″ | 17.00″ | 15.00″ | .063″ | 14.38″ | 2.19″ | 1.19″ | 2.13″ | 1.00″ | 12 |
| 14″ | 14.19″ | 21.00″ | 18.75″ | 16.25″ | .063″ | 15.75″ | 2.25″ | 1.32″ | 2.19″ | 1.12″ | 12 |
| 16″ | 16.19″ | 23.50″ | 21.25″ | 18.50″ | .063″ | 18.00″ | 2.50″ | 1.38″ | 2.44″ | 1.12″ | 16 |
| 18″ | 18.19″ | 25.00″ | 22.75″ | 21.00″ | .063″ | 19.88″ | 2.69″ | 1.50″ | 2.63″ | 1.25″ | 16 |
| 20″ | 20.19″ | 27.50″ | 25.00″ | 23.00″ | .063″ | 22.00″ | 2.88″ | 1.63″ | 2.83″ | 1.25″ | 20 |
| 22″ | 22.19″ | 29.50″ | 27.25″ | 25.25″ | .063″ | 24.25″ | 3.13″ | 1.75″ | 3.07″ | 1.38″ | 20 |
| 24″ | 24.19″ | 32.00″ | 29.50″ | 27.25″ | .063″ | 26.12″ | 3.25″ | 1.82″ | 3.19″ | 1.38″ | 20 |
| FLANGE NPS |
Inside Diameter |
Outside Diameter |
Bolt Circle (BC) | Raised Face (R) | Raised Face (RF) | H | Raised Face Thickness (T) | T1 | Flat Face Thickness (T2) | Bolt Hole (B) | No. of Bolt Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2″ | 0.93″ | 3.75″ | 2.62″ | 1.38″ | .063″ | 1.50″ | 0.88″ | 0.50″ | 0.82″ | 0.62″ | 4 |
| 3/4″ | 1.14″ | 4.62″ | 3.25″ | 1.69″ | .063″ | 1.88″ | 1.00″ | .056″ | 0.94″ | 0.75″ | 4 |
| 1″ | 1.41″ | 4.88″ | 3.50″ | 2.00″ | .063″ | 2.12″ | 1.06″ | 0.63″ | 1.00″ | 0.75″ | 4 |
| 1-1/4″ | 1.75″ | 5.25″ | 3.88″ | 2.50″ | .063″ | 2.50″ | 1.06″ | 0.69″ | 1.00″ | 0.75″ | 4 |
| 1-1/2″ | 1.99″ | 6.12″ | 4.50″ | 2.88″ | .063″ | 2.75″ | 1.19″ | 0.75″ | 1.13″ | 0.88″ | 4 |
| 2″ | 2.50″ | 6.50″ | 5.00″ | 3.62″ | .063″ | 3.31″ | 1.31″ | 0.82″ | 1.25″ | 0.75″ | 8 |
| 2-1/2″ | 3.00″ | 7.50″ | 5.88″ | 4.12″ | .063″ | 3.94″ | 1.50″ | 0.94″ | 1.44″ | 0.88″ | 8 |
| 3″ | 3.63″ | 8.25″ | 6.62″ | 5.00″ | .063″ | 4.62″ | 1.69″ | 1.06″ | 1.63″ | 0.88″ | 8 |
| 3-1/2″ | 4.13″ | 9.00″ | 7.25″ | 5.50″ | .063″ | 5.25″ | 1.75″ | 1.13″ | 1.69″ | 0.88″ | 8 |
| 4″ | 4.63″ | 10.00″ | 7.88″ | 6.19″ | .063″ | 5.75″ | 1.88″ | 1.19″ | 1.82″ | 0.88″ | 8 |
| 5″ | 5.69″ | 11.00″ | 9.25″ | 7.31″ | .063″ | 7.00″ | 2.00″ | 1.32″ | 1.94″ | 0.88″ | 8 |
| 6″ | 6.75″ | 12.50″ | 10.62″ | 8.50″ | .063″ | 8.12″ | 2.06″ | 1.38″ | 2.00″ | 0.88″ | 12 |
| 8″ | 8.75″ | 15.00″ | 13.00″ | 10.62″ | .063″ | 10.25″ | 2.44″ | 1.56″ | 2.38″ | 1.00″ | 12 |
| 10″ | 10.88″ | 17.50″ | 15.25″ | 12.75″ | .063″ | 12.62″ | 2.62″ | 1.82″ | 2.56″ | 1.12″ | 16 |
| 12″ | 12.94″ | 20.50″ | 17.75″ | 15.00″ | .063″ | 14.75″ | 2.88″ | 1.94″ | 2.82″ | 1.25″ | 16 |
| 14″ | 14.19″ | 23.00″ | 20.25″ | 16.25″ | .063″ | 16.75″ | 3.00″ | 2.06″ | 2.94″ | 1.25″ | 20 |
| 16″ | 16.19″ | 25.50″ | 22.50″ | 18.50″ | .063″ | 19.00″ | 3.25″ | 2.19″ | 3.19″ | 1.38″ | 20 |
| 18″ | 18.19″ | 28.00″ | 24.75″ | 21.00″ | .063″ | 21.00″ | 3.50″ | 2.32″ | 3.44″ | 1.38″ | 24 |
| 20″ | 20.19″ | 30.50″ | 27.00″ | 23.00″ | .063″ | 23.12″ | 3.75″ | 2.44″ | 3.69″ | 1.38″ | 24 |
| 22″ | 22.19″ | 33.00″ | 29.25″ | 25.25″ | .063″ | 25.25″ | 4.00″ | 2.57″ | 3.94″ | 1.63″ | 24 |
| 24″ | 24.19″ | 36.00″ | 32.00″ | 27.25″ | .063″ | 27.62″ | 4.19″ | 2.69″ | 4.13″ | 1.62″ | 24 |
| FLANGE NPS |
Inside Diameter |
Outside Diameter |
Bolt Circle (BC) | Raised Face (R) | Raised Face (RF) | H | Raised Face Thickness (T) | T1 | Flat Face Thickness (T2) | Bolt Hole (B) | No. of Bolt Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2″ | 0.93″ | 3.75″ | 2.62″ | 0.12″ | .250″ | 1.50″ | 1.13″ | 0.56″ | 0.88″ | 0.62″ | 4 |
| 3/4″ | 1.14″ | 4.62″ | 3.25″ | 0.12″ | .250″ | 1.88″ | 1.25″ | 0.62″ | 1.00″ | 0.75″ | 4 |
| 1″ | 1.41″ | 4.88″ | 3.50″ | 0.12″ | .250″ | 2.12″ | 1.31″ | 0.69″ | 1.06″ | 0.75″ | 4 |
| 1-1/4″ | 1.75″ | 5.25″ | 3.88″ | 0.19″ | .250″ | 2.50″ | 1.37″ | 0.81″ | 1.12″ | 0.75″ | 4 |
| 1-1/2″ | 1.99″ | 6.12″ | 4.50″ | 0.25″ | .250″ | 2.75″ | 1.50″ | 0.88″ | 1.25″ | 0.88″ | 4 |
| 2″ | 2.50″ | 6.50″ | 5.00″ | 0.31″ | .250″ | 3.31″ | 1.69″ | 1.00″ | 1.44″ | 0.75″ | 8 |
| 2-1/2″ | 3.00″ | 7.50″ | 5.88″ | 0.31″ | .250″ | 3.94″ | 1.87″ | 1.12″ | 1.62″ | 0.88″ | 8 |
| 3″ | 3.63″ | 8.25″ | 6.62″ | 0.38″ | .250″ | 4.62″ | 2.06″ | 1.25″ | 1.81″ | 0.88″ | 8 |
| 3-1/2″ | 4.13″ | 9.00″ | 7.25″ | 0.38″ | .250″ | 5.25″ | 2.19″ | 1.38″ | 1.94″ | 1.00″ | 8 |
| 4″ | 4.63″ | 10.00″ | 7.88″ | 0.44″ | .250″ | 5.75″ | 2.25″ | 1.38″ | 2.00″ | 1.00″ | 8 |
| 5″ | 5.69″ | 11.00″ | 9.25″ | 0.44″ | .250″ | 7.00″ | 2.37″ | 1.50″ | 2.12″ | 1.00″ | 8 |
| 6″ | 6.75″ | 12.50″ | 10.62″ | 0.50″ | .250″ | 8.12″ | 2.50″ | 1.62″ | 2.25″ | 1.00″ | 12 |
| 8″ | 8.75″ | 15.00″ | 13.00″ | 0.50″ | .250″ | 10.25″ | 2.94″ | 1.88″ | 2.69″ | 1.12″ | 12 |
| 10″ | 10.88″ | 17.50″ | 15.25″ | 0.50″ | .250″ | 12.62″ | 3.13″ | 2.12″ | 2.88″ | 1.25″ | 16 |
| 12″ | 12.94″ | 20.50″ | 17.75″ | 0.50″ | .250″ | 14.75″ | 3.37″ | 2.25″ | 3.12″ | 1.38″ | 16 |
| 14″ | 14.19″ | 23.00″ | 20.25″ | 0.50″ | .250″ | 16.75″ | 3.56″ | 2.38″ | 3.31″ | 1.38″ | 20 |
| 16″ | 16.19″ | 25.50″ | 22.50″ | 0.50″ | .250″ | 19.00″ | 3.94″ | 2.50″ | 3.69″ | 1.50″ | 20 |
| 18″ | 18.19″ | 28.00″ | 24.75″ | 0.50″ | .250″ | 21.00″ | 4.13″ | 2.62″ | 3.88″ | 1.50″ | 24 |
| 20″ | 20.19″ | 30.50″ | 27.00″ | 0.50″ | .250″ | 23.12″ | 4.25″ | 2.75″ | 4.00″ | 1.62″ | 24 |
| 22″ | 22.19″ | 33.00″ | 29.25″ | 0.50″ | .250″ | 25.25″ | 4.50″ | 2.88″ | 4.25″ | 1.75″ | 24 |
| 24″ | 24.19″ | 36.00″ | 32.00″ | 0.50″ | .250″ | 27.62″ | 4.75″ | 3.00″ | 4.50″ | 1.88″ | 24 |
| FLANGE NPS |
Inside Diameter |
Outside Diameter |
Bolt Circle (BC) | Raised Face (R) | Raised Face (RF) | H | Raised Face Thickness (T) | T1 | Flat Face Thickness (T2) | Bolt Hole (B) | No. of Bolt Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2″ | 0.93″ | 3.75″ | 2.62″ | 1.38″ | .250″ | 1.50″ | 1.13″ | 0.56″ | 0.88″ | 0.62″ | 4 |
| 3/4″ | 1.14″ | 4.62″ | 3.25″ | 1.69″ | .250″ | 1.88″ | 1.25″ | 0.62″ | 1.00″ | 0.75″ | 4 |
| 1″ | 1.41″ | 4.88″ | 3.50″ | 2.00″ | .250″ | 2.12″ | 1.31″ | 0.69″ | 1.06″ | 0.75″ | 4 |
| 1-1/4″ | 1.75″ | 5.25″ | 3.88″ | 2.50″ | .250″ | 2.50″ | 1.37″ | 0.81″ | 1.12″ | 0.75″ | 4 |
| 1-1/2″ | 1.99″ | 6.12″ | 4.50″ | 2.88″ | .250″ | 2.75″ | 1.50″ | 0.88″ | 1.25″ | 0.88″ | 4 |
| 2″ | 2.50″ | 6.50″ | 5.00″ | 3.62″ | .250″ | 3.31″ | 1.69″ | 1.00″ | 1.44″ | 0.75″ | 8 |
| 2-1/2″ | 3.00″ | 7.50″ | 5.88″ | 4.12″ | .250″ | 3.94″ | 1.87″ | 1.12″ | 1.62″ | 0.88″ | 8 |
| FLANGE NPS |
Inside Diameter |
Outside Diameter |
Bolt Circle (BC) | Raised Face (R) | Raised Face (RF) | H | Raised Face Thickness (T) | T1 | Flat Face Thickness (T2) | Bolt Hole (B) | No. of Bolt Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2″ | 0.93″ | 4.75″ | 3.25″ | 1.38″ | .250″ | 1.50″ | 1.50″ | 0.88″ | 1.25″ | 0.88″ | 4 |
| 3/4″ | 1.14″ | 5.13″ | 3.50″ | 1.69″ | .250″ | 1.75″ | 1.63″ | 1.00″ | 1.38″ | 0.88″ | 4 |
| 1″ | 1.41″ | 5.88″ | 4.00″ | 2.00″ | .250″ | 2.06″ | 1.88″ | 1.13″ | 1.63″ | 1.00″ | 4 |
| 1-1/4″ | 1.75″ | 6.25″ | 4.38″ | 2.50″ | .250″ | 2.50″ | 1.88″ | 1.13″ | 1.63″ | 1.00″ | 4 |
| 1-1/2″ | 1.99″ | 7.00″ | 4.88″ | 2.88″ | .250″ | 2.75″ | 2.00″ | 1.25″ | 1.75″ | 1.13″ | 4 |
| 2″ | 2.50″ | 8.50″ | 6.50″ | 3.63″ | .250″ | 4.13″ | 2.50″ | 1.50″ | 2.25″ | 1.00″ | 8 |
| 2-1/2″ | 3.00″ | 9.63″ | 7.50″ | 4.13″ | .250″ | 4.88″ | 2.75″ | 1.63″ | 2.50″ | 1.13″ | 8 |
| 3″ | 3.63″ | 9.50″ | 7.50″ | 5.00″ | .250″ | 5.00″ | 2.38″ | 1.50″ | 2.13″ | 1.00″ | 8 |
| 4″ | 4.63″ | 11.50″ | 9.25″ | 6.19″ | .250″ | 6.25″ | 3.00″ | 1.75″ | 2.75″ | 1.25″ | 8 |
| 5″ | 5.69″ | 13.75″ | 11.00″ | 7.31″ | .250″ | 7.50″ | 3.38″ | 3.00″ | 3.13″ | 1.38″ | 8 |
| 6″ | 6.75″ | 15.00″ | 12.50″ | 8.50″ | .250″ | 9.25″ | 3.63″ | 2.19″ | 3.38″ | 1.25″ | 12 |
| 8″ | 8.75″ | 18.50″ | 15.50″ | 10.63″ | .250″ | 11.75″ | 4.25″ | 2.50″ | 4.00″ | 1.50″ | 12 |
| 10″ | 10.88″ | 21.50″ | 18.50″ | 12.75″ | .250″ | 14.50″ | 4.50″ | 2.75″ | 4.25″ | 1.50″ | 16 |
| 12″ | 12.94″ | 24.00″ | 21.00″ | 15.00″ | .250″ | 16.50″ | 4.88″ | 3.13″ | 4.63″ | 1.50″ | 20 |
| 14″ | 14.19″ | 25.25″ | 22.00″ | 16.25″ | .250″ | 17.75″ | 5.38″ | 3.38″ | 5.13″ | 1.63″ | 20 |
| 16″ | 16.19″ | 27.75″ | 24.25″ | 18.50″ | .250″ | 20.00″ | 5.50″ | 3.50″ | 5.25″ | 1.75″ | 20 |
| 18″ | 18.19″ | 31.00″ | 27.00″ | 21.00″ | .250″ | 22.25″ | 6.25″ | 4.00″ | 6.00″ | 2.00″ | 20 |
| 20″ | 20.19″ | 33.75″ | 29.50″ | 23.00″ | .250″ | 24.50″ | 6.50″ | 4.25″ | 6.25″ | 2.13″ | 20 |
| 24″ | 24.19″ | 41.00″ | 35.50″ | 27.25″ | .250″ | 29.50″ | 8.25″ | 5.50″ | 8.00″ | 2.63″ | 20 |
| FLANGE NPS |
Inside Diameter |
Outside Diameter |
Bolt Circle (BC) | Raised Face (R) | Raised Face (RF) | H | Raised Face Thickness (T) | T1 | Flat Face Thickness (T2) | Bolt Hole (B) | No. of Bolt Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2″ | 0.93″ | 4.75″ | 3.25″ | 1.38″ | .250″ | 1.50″ | 1.50″ | 0.88″ | 1.25″ | 0.88″ | 4 |
| 3/4″ | 1.14″ | 5.13″ | 3.50″ | 1.69″ | .250″ | 1.75″ | 1.63″ | 1.00″ | 1.38″ | 0.88″ | 4 |
| 1″ | 1.41″ | 5.88″ | 4.00″ | 2.00″ | .250″ | 2.06″ | 1.88″ | 1.13″ | 1.63″ | 1.00″ | 4 |
| 1-1/4″ | 1.75″ | 6.25″ | 4.38″ | 2.50″ | .250″ | 2.50″ | 1.88″ | 1.13″ | 1.63″ | 1.00″ | 4 |
| 1-1/2″ | 1.99″ | 7.00″ | 4.88″ | 2.88″ | .250″ | 2.75″ | 2.00″ | 1.25″ | 1.75″ | 1.13″ | 4 |
| 2″ | 2.50″ | 8.50″ | 6.50″ | 3.63″ | .250″ | 4.13″ | 2.50″ | 1.50″ | 2.25″ | 1.00″ | 8 |
| 2-1/2″ | 3.00″ | 9.63″ | 7.50″ | 4.13″ | .250″ | 4.88″ | 2.75″ | 1.63″ | 2.50″ | 1.13″ | 8 |
| FLANGE NPS |
Inside Diameter |
Outside Diameter |
Bolt Circle (BC) | Raised Face (R) | Raised Face (RF) | H | Raised Face Thickness (T) | T1 | Flat Face Thickness (T2) | Bolt Hole (B) | No. of Bolt Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2″ | 0.93″ | 5.25″ | 3.50″ | 1.38″ | .250″ | 1.69″ | 1.81″ | 1.19″ | 1.56″ | 0.88″ | 4 |
| 3/4″ | 1.14″ | 5.50″ | 3.75″ | 1.69″ | .250″ | 2.00″ | 1.94″ | 1.25″ | 1.69″ | 0.88″ | 4 |
| 1″ | 1.41″ | 6.25″ | 4.25″ | 2.00″ | .250″ | 2.25″ | 2.13″ | 1.38″ | 1.88″ | 1.00″ | 4 |
| 1-1/4″ | 1.75″ | 7.25″ | 5.13″ | 2.50″ | .250″ | 2.88″ | 2.31″ | 1.50″ | 2.06″ | 1.13″ | 4 |
| 1-1/2″ | 1.99″ | 8.00″ | 5.75″ | 2.88″ | .250″ | 3.13″ | 2.63″ | 1.75″ | 2.38″ | 1.25″ | 4 |
| 2″ | 2.50″ | 9.25″ | 6.75″ | 3.63″ | .250″ | 3.75″ | 3.00″ | 2.00″ | 2.75″ | 1.13″ | 8 |
| 2-1/2″ | 3.00″ | 10.50″ | 7.75″ | 4.13″ | .250″ | 4.50″ | 3.38″ | 2.25″ | 3.13″ | 1.25″ | 8 |
| Pipe Size | 150 # | 300 # | 600 # | 900 # | 1500 # | 2500 # | ||||||||||||
| WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | WN | SO | BLD | |
| 1/2" | 2 | 1 | 1 | 2 | 1 | 1 | 2 | 2 | 2 | SEE 1500 # WEIGHTS | 5 | 4 | 4 | 7 | 7 | 7 | ||
| 3/4" | 2 | 2 | 2 | 3 | 3 | 3 | 4 | 3 | 3 | SEE 1500 # WEIGHTS | 6 | 5 | 6 | 8 | 8 | 8 | ||
| 1" | 3 | 2 | 2 | 4 | 3 | 3 | 4 | 4 | 4 | SEE 1500 # WEIGHTS | 9 | 8 | 8 | 12 | 11 | 11 | ||
| 1 1/2" | 4 | 3 | 3 | 7 | 6 | 6 | 8 | 7 | 8 | SEE 1500 # WEIGHTS | 13 | 12 | 13 | 25 | 22 | 23 | ||
| 2" | 6 | 5 | 5 | 9 | 7 | 8 | 12 | 9 | 10 | SEE 1500 # WEIGHTS | 25 | 25 | 25 | 42 | 37 | 39 | ||
| 2 1/2" | 8 | 7 | 7 | 12 | 10 | 12 | 18 | 13 | 15 | SEE 1500 # WEIGHTS | 36 | 36 | 35 | 52 | 55 | 56 | ||
| 3" | 10 | 8 | 9 | 15 | 13 | 16 | 23 | 16 | 20 | 31 | 26 | 29 | 48 | 48 | 48 | 94 | 83 | 86 |
| 4" | 15 | 13 | 17 | 25 | 22 | 27 | 42 | 37 | 41 | 53 | 53 | 54 | 73 | 73 | 73 | 145 | 125 | 130 |
| 5" | 19 | 15 | 20 | 32 | 28 | 35 | 68 | 63 | 68 | 86 | 83 | 87 | 130 | 130 | 140 | 245 | 210 | 225 |
| 6" | 24 | 19 | 26 | 42 | 39 | 50 | 81 | 80 | 86 | 110 | 110 | 115 | 165 | 165 | 160 | 380 | 325 | 345 |
| 8" | 39 | 30 | 45 | 67 | 58 | 81 | 120 | 115 | 140 | 175 | 170 | 200 | 275 | 260 | 300 | 580 | 485 | 530 |
| 10" | 52 | 43 | 70 | 91 | 81 | 124 | 190 | 170 | 230 | 260 | 245 | 290 | 455 | 435 | 510 | 1075 | 930 | 1025 |
| 12" | 80 | 64 | 110 | 140 | 115 | 185 | 225 | 200 | 295 | 325 | 325 | 415 | 690 | 580 | 690 | 1525 | 1100 | 1300 |
| 14" | 110 | 90 | 140 | 180 | 165 | 250 | 280 | 230 | 355 | 400 | 400 | 520 | 940 | NA | 975 | NA | NA | NA |
| 16" | 140 | 98 | 180 | 250 | 190 | 295 | 390 | 330 | 495 | 495 | 425 | 600 | 1250 | NA | 1300 | NA | NA | NA |
| 18" | 150 | 130 | 220 | 320 | 250 | 395 | 475 | 400 | 630 | 680 | 600 | 850 | 1625 | NA | 1750 | NA | NA | NA |
| 20" | 180 | 165 | 285 | 400 | 315 | 505 | 590 | 510 | 810 | 830 | 730 | 1075 | 2050 | NA | 2225 | NA | NA | NA |
| 22" | 225 | 185 | 355 | 465 | 370 | 640 | 720 | 590 | 1000 | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| 24" | 260 | 220 | 430 | 580 | 475 | 790 | 830 | 730 | 1250 | 1500 | 1400 | 2025 | 3325 | NA | 3625 | NA | NA | NA |
The final process of dispatch is the most tedious of all, and heavy duty cranes are used for it. With the help of our extensive delivery chain we can ensure time critical deliveries at the behest of our esteemed clients.
Our all Screwed Flange packed with seaworthy packing method then delivery to customers, usually the packing way include wooden box, wooden pallet. We make sure that it is seaworthy, strong, waterproof and easy for loading and unloading.
| Stainless Steel Screwed Flange | ASTM B564 Raised Faced Screwed Flanges |
| Class 900 Screwed Flange Dimensions | Duplex Steel Screwed Flanges |
| DIN 2503 PN25 Screwed Flanges Supplier | Suppliers of DIN 2543 PN16 Screwed Flanges |
| 4 inch Stainless Steel Screwed Flange | Plain Screwed Flanges Stockholder |
| ASME B16.5 Screwed Flange | Screwed Flange Supplier in India |
| Class 1500 Screwed Flanges Distributor in Mumbai | ASME B16.5 Screwed Flanges Exporter |
| JIS 10K Screwed Flange Supplier in Mumbai | MS Screwed Flange Table E |
| Table E Screwed Pipe Flanges Supplier in Mumbai | Class 1500 Screwed Flange Dimensions |
| PN16 Screwed Flange Dimensions | Table D Screwed Flange Dimensions |
| Raised Face Screwed Flange Manufacturer | ANSI B16.5 Forged Screwed Flange |
| A182 Screwed Forged Flanges | Titanium Flat Faced Screwed Flanges |
| ASME SA105N Raised Faced Screwed Flanges | 18 inch Screwed Class 150 Carbon Steel Flange |
| EN 1092-2 PN16 Screwed Flange Stockist in India | AWWA C207 Class D Screwed Flange |
| ANSI B16.5 Class 150 Screwed Flange | ASME B16.47 Series B Screwed Flanges Dealer in India |
| Carbon Steel Screwed Flat Face Pipe Flange | ANSI #150 RTJ Screwed Flange Supplier |
| 8 Inch Screwed Flanges | ANSI B16.5 150 LBS Screwed Flanges |
| ASME B16.5 Class 300 Screwed Flanges Stockist | Flat Faced Screwed Flanges |
| ASME B16.5 Screwed Flange Manufacturer | 150# Flat Face Screwed Flange Manufacturer |
| JIS 16K Screwed Flange Dealer | DIN 86029 PN10 Screwed Flange Manufacturer |
| Nickel Alloy Screwed Plate Flange | Mild Steel Screwed Flange |
| Duplex Steel Screwed Flanges Supplier in Mumbai | SS Screwed Flange 150LBS |
| ASME B16.5 Class 600 Raised Faced Screwed Flanges | Screwed Flange Exporter |
| ASME B16.47 Series A Screwed Flange Manufacturer | JIS 10K Screwed Flanges |
| JIS B2220 10K Screwed Flange | PN 10 Male Screwed Flanges |
| BS 4504 PN10 Screwed Flanges Supplier in Mumbai | Alloy Steel Screwed Flanges Manufacturer in India |
| JIS B2220 5K 10K 16K Screwed Flanges | DIN Standard PN25 Screwed Flanges |
| 18 inch Screwed Class 150 Carbon Steel Flange | AWWA C207 Screwed Flanges |
| EN 1092-2 Female Screwed Flanges | Carbon Steel Raised Face Screwed Flange Stockist |
| ANSI B16.5 Screwed Flanges Wholesaler | EN 1092-1 Screwed Flanges Supplier |
| Alloy 20 Screwed Flanges | Copper Nickel Screwed Flanges at Best Price |
| JIS 5K Screwed Flange Dimensions | 30 Inch Screwed Flange Dimensions |
super duplex steel screwed flanges, asme b16.47 screwed flange dimensions, table d screwed flange dimensions, screwed flange price list philippines, screwed flanges stockist in mumbai, monel screwed flanges exporter, 1/2 screwed flange, screwed flange jis 5k, screwed flange dealer in gujarat, awwa c207 class d screwed flange, en 1092-1 screwed flange, dimensions of screwed flange, screwed flanges dealer, screwed flange price, class 600# screwed flanges exporter, inconel screwed flanges wholesaler, stainless steel screwed flanges importer, titanium screwed flanges stockist in mumbai, biggest screwed flange manufacturer in india, screwed flanges supplier in mumbai, screwed pipe flanges supplier in india, screwed flange thickness, carbon steel screwed flange manufacturer, bs10 table d screwed flange, screwed flange at best price in india, screwed flanges manufacturer in rajkot, screwed flanges manufacturer in mumbai, class 900# screwed flanges stock, pn16 screwed flange dimensions, screwed flanges dealer, screwed flange pn10, screwed flange price in ahmedabad, screwed flange dn80 pn10, hastelloy screwed flanges manufacturer in mumbai, class 900 screwed flange dimensions, screwed flange price list in india, nickel alloy screwed flange supplier in mumbai, alloy 20 screwed flanges manufacturer, ms screwed flange, class 600 screwed flange dimensions, incoloy screwed flanges distributor, copper nickel screwed manufacturer in mumbai, 30 inch screwed flange dimensions, cost of screwed flange, screwed flanges manufacturers in india, price of stainless steel screwed flanges, screwed flange dimensions in mm, duplex steel screwed flanges supplier in india, asme b16.5 ss screwed flange, screwed flanges traders, ansi b 16.5 screwed flange dimensions, table e screwed flange dimensions, smo 254 screwed flange price list, screwed flanges stockholder, screwed flange dimensions mm, screwed flange distribution, screwed flange din 2576 pn10, screwed flange price list in mumbai, screwed flange ansi b16.5 class 150, jis 5k screwed flange dimensions, screwed flange 150 lbs dimensions, 150 lb screwed flange dimensions, alloy steel screwed flanges supplier, screwed flange weight chart in kg, screwed flange din 2576 pn16, screwed flange dimensions 300#, screwed flanges manufacturer in india, asme 16.5 screwed flanges stockholder, nickel alloy screwed flange price list in india, class 1500# screwed flanges.
| Bengaluru | Mumbai | Chennai | Hyderabad | Kolkata | Pune |
| New Delhi | Ahmedabad | Jaipur | Surat | Salem | Gandhinagar |
| Bhiwandi | Tiruppur | Sivakasi | Jamnagar | Thiruvananthapuram | Rajahmundry |
| Bhubaneswar | Vijaywada | Firozabad | Bokaro Steel City | Rajkot | Bharuch |
| Panna | Raipur | Cochin | Ludhiana | Panipat | Durgapur |
| Peenya | Pimpri-Chinchwad | Channapatna | Kharagpur | Nashik | Bareilly |
| Varanasi | Haldia | Rourkela | Bangalore | Moradabad | Indore |
| Visakhapatnam | Trivandrum | Pithampur | Dibrugarh | Angul | Gwalior |
| Coimbatore | Kannur | Nagpur | Vadodara | Rudrapur | Noida |
| Agra | Bhagalpur | Jamshedpur | Bhilai | Lucknow | Kanpur |
| Thane | Bhopal | Sri City | Bareilly | Hosdurg | Pithampur |
Rajendra Industrial Corporation is a highly acclaimed manufacturer, supplier and exporter of Stainless Steel Flanges, Carbon Steel Flanges and Alloy Steel Flanges like Slipon Flanges, BLRF Flanges, Weldneck Flanges, Socket Weld Flanges etc.